Tile leveling system “BASE” from 1.0 mm, 1.5 mm and 2.0 mm (100 pieces per package)
Leveling systems have clips (BASE) and wedges that press the tile. The base is placed under the tiles, and the wedges that press them are placed on top of them. Wedges have a surface with small teeth. They are pressed or hammered until the tiles pressed in this way take the correct position. In some systems, it is possible to buy a clamp (nippers) for driving wedges, which facilitates and speeds up the work. Otherwise, you have to do it manually, which is tiring. Clips and wedges are placed under the plates, approximately in the center, at regular intervals. After laying and pressing the first row of tiles to the glue, clips with a hole in the upper part are inserted under them at equal intervals. Then another row of tiles is laid. Then you can wedge the tiles to get an even plane.
